603-225-2779 x 254 email us

Snoscoot.com stocks lots of Yamaha Sno-sport parts. From carburetor rebuild kits to track replacement kits, we have your Sno-sport needs covered. If you have questions about anything we have listed, please give us a call or send us an email.

BODY PANEL FASTENER KIT - $19.99

We stock body panel fastener kits for all Sno-ports. The kit includes four genuine Yamaha anti-crush bushings and 4 high-quality stainless button head bolts of the stock length (head is slightly smaller) to replace the stock Yamaha bolts, part number 98980-06016-00. This is all the hardware required to safely and securely mount the plastic body to your Sno-sport.


BRAKE LEVERS - $13.99

We stock OEM Sno-sport brake levers. The Yamaha part number for this item is 8H8-83912-00-00 and it is a stock replacement part for both years of the Sno-sport.


BRAKE PADS - $29.99/SET

We stock quality aftermarket Sno-sport brake pads. These pads come as a set of two, save you a few dollars over the factory Yamaha pads, and are exact duplicates of the Yamaha part number 89J-25811-00-00. These pads fit both years of the Sno-sport.


CARBURETORS - $434.99

We were just notified that Sno-sport carburetors are now discontinued by Yamaha and we are completely out of stock. As soon as time allows we will be looking into alternatives for this. Please stay posted if you are in need of one.


CARBURETOR REBUILD KITS - $68.99

We stock Sno-sport carburetor rebuild kits. The kit includes a new main jet, pilot jet, needle valve (float valve), two float bowl gaskets that replace the stock discontinued Yamaha gasket (two gaskets are stacked under the carb bowl) and the two ever-important rubber caps. This kit replaces all the common parts to wear out on your carb and is simple to install. We have even put together instructions for those of you who have not rebuilt a Sno-sport carb before. This kit fits both years of the Sno-sport.

Click HERE to see our detailed instructions.


CARBURETOR NEEDLE VALVES - $19.99

We stock OEM Sno-sport carburetors needle valves, which are also known as float valves. The part number for this item is 168-14190-10-00 and it is a stock replacement part for all stock Sno-sport carburetors.


BRAKE CABLES - $48.99

We stock quality aftermarket brake cables for Sno-sports. The stock Yamaha cable, part number 87A-26340-00-00 has been discontinued, so we have these cables custom made by Motion Pro. These cables are stock length and do not come with the rubber grommet that presses into the disk brake guard. This cable fits both years of the Sno-sport.


CHOKE CABLES

The OEM Yamaha sno-sport choke cable, part number 87A-26331-00-00, has been discontinued but we are currently working with Motion Pro to have them reproduced. If you are in need of a choke cable for your Sno-sport, please keep an eye on this page, as we will be offering them as soon as they arrive.


THROTTLE CABLES - $44.99

We stock quality aftermarket throttle cables for Sno-sports. The stock Yamaha cable, part number 87A-26311-00-00 has been discontinued, so we have these cables custom made by Motion Pro. These cables are stock length and duplicates of the original part. This cable fits both years of the Sno-sport.


PRIMARY CLUTCH WEIGHT SETS - $80.99

We stock OEM Sno-sport primary clutch weight sets. These parts are also known as clutch rollers and the part number for each of the six included weights is 87A-17632-00-00. This set of weights fits stock clutches on both years of the Sno-sport.


SECONDARY CLUTCH SHOE ASSEMBLY - $181.99

We offer a genuine Yamaha replacement driven clutch shoe assembly for all Sno-sports. The original Yamaha part number 87A-16620-00-00 has been discontinued, so we hunted down this alternative Yamaha assembly that bolts right in place and works great on both years of the Sno-sport. This part typically ships in about 5 business days.


DRIVE BELTS - $119.99

We stock OEM Sno-sport drive belts. The Yamaha part number for this belt is 50W-17641-01-00 and it is a stock replacement for both years of the Sno-sport.


BATTERIES - $42.99

We stock Bike Master sealed cell batteries for Sno-sports. These high-quality batteries are made by Yuasa and fit both years of the Sno-sport. Due to shipping restrictions, these batteries are shipped without acid.


BATTERY BANDS - $4.99

The stock battery band for the Yamaha Sno-sport, part number 8R4-2811G-00-00, has been discontinued, but we were able to find a Suzuki part that works in place of it. This band is even less money than the stock part!


HEADLIGHT BULBS - $5.99

We stock OEM Sno-sport headlight bulbs. The part number for this item is 8A7-84314-00-XX and it is a stock replacement part for both years of the Sno-sport.


HEADLIGHT DIMMER SWITCHES - $24.99

We stock quality aftermarket Sno-sport headlight dimmer switches. An exact duplicate of the original, these headlight switches are about 10 less than the original Yamaha part and fit both years of the Sno-sport.


IGNITION SWITCHES - $39.99/$75.49

We stock quality aftermarket and OEM ignition switches. The aftermarket switch is for kickstart only machines and the OEM switch is for electric start machines. The aftermarket switch is available for $24.99 and is an exact duplicate of the original switch at a fraction of the price. The part number for the OEM switch for electric start machines is 8K1-82510-20-00 and is available for $75.49. These switches fit both years of the Sno-sport.


IGNITION COILS - $77.99

We offer OEM Sno-sport ignition coils. They come equipped with a high-quality NGK spark plug cap and the part number for the coil itself is 86B-82310-10-00, which has replaced part number 86B-82310-00-00. This is a stock replacement coil assembly for both years of the Sno-sport. This part typically ships in about 5 business days.


KILL SWITCHES - $63.99

We stock replacement Sno-sport kill switches again! After a couple years of hunting for a direct replacement for the now discontinued Sno-sport kill switch, pleading with aftermarket manufactures to make them for us, and basically pulling our hair out, we finally have a solution! We have come up with an alternate genuine Yamaha switch that fits that handlebard switch housing, but IT MUST BE SPLICED IN as the connector is of a different style and the wires are a different length than the stock stitch. However, the switch part itself is identical to the stock Yamaha switch. Match up the wires, solder and seal them up, and you're good to go!


SPARK PLUGS - $4.99

We stock NGK BR8HS spark plugs, which is the stock plug for all Sno-sports. These are always good to have on the shelf if you own a Sport.


STATORS - $152.99

We offer genuine Yamaha Sno-sport stator coil assemblies. These stators will fit all years of the Yamaha Sno-sport and the Yamaha part number is 85G-81403-M1-00. Please be aware that this assembly will require soldering of your stock harness connections to install. As of 11/16, Yamaha states that this part is on backorder with an ETA of 11/19. If you are in need of one of these parts, please contact us first for further availability info.


TAILLIGHTS - $44.99

We stock OEM Sno-sport taillight assemblies. The Yamaha part number for this light is 85G-84710-00-00 and it is a stock replacement for all years of the Sno-sport.


TAILLIGHT BULBS - $2.99

We stock OEM Sno-sport taillight bulbs. The Yamaha part number for this item is 137-84714-61-XX it is a stock replacement part for both years of the Sno-sport.


EXHAUST SEALING KITS - $28.99

We stock OEM Sno-sport exhaust sealing kits. The kit includes a new header pipe gasket and a center seal, for which the Yamaha part numbers are 87A-14613-00-00 and 1W2-14714-00-00. The two parts are pointed out in the diagram to the left and this kit fits both years of the Sno-sport.



FRONT SHOCK ABSORBERS

The original Yamaha front shocks for Sno-sports, part number 87A-23350-00-00, have been discontinued, and the Honda shocks that we've been offering as a replacement have also just been discontinued (this October). That means that we're back to the drawing board! As soon as we have a viable solution, we'll post details to this page. If you're interested in being a gunea pig for us and own a Sno-sport, please give us a call.


FUEL PUMP REPLACEMENT KIT - $124.99

We stock fuel pump replacement kits for Yamaha Sno-sports. As the original fuel pump, part number 87A-24410-00-00, was recently discontinued, we have developed a replacement kit that uses a genuine Yamaha pump and includes a CNC laser cut aluminum adapter plate to mount it in the original pump location. We also include 4' of fuel line for fuel in and out, 3' of tube for the engine suction line (powers the pump), a Yamaha T-fitting to bring oil into the "fuel in" line, the required fuel line clamps, and two sets of spacers for the back of the plate that allow you to use your original fuel pump mounting bolts. This ensures that you have everything to install it on your machine. Reuse of the stock fuel pump mounting bolts are required to install this kit. To see how this kit will need to be assembled, please hover your cursor over the picture to the left. This kit fits both years of the Sno-sport.


FUEL PRIMER KITS - $87.99

We stock fuel primer kits for Yamaha Sno-sports. As the factory "choke" feature on the Sport is actually a fuel enricher circuit, and the stock choke plunger has been discontinued (part number 5V7-14171-00-00), this is your cold-start solution. Our kit comes with everything needed to install the kit, which is pictured to the left (included "choke plunger" block-off plug not shown) and it works on both years of the Sno-sport.

INSTALLATION INSTRUCTIONS:

To install the kit, remove your choke cable and plunger in the carburetor, and insert our choke block-off plug, screwing the cap on snugly to seal off the chamber. Next install the included T-fitting in line just before the fuel pump, install the primer pump in the dash panel where the choke cable mounted, and install the included machined spacer plate between the intake boot and reed cage with the included gaskets and bolts. Connect the T-fitting to the "fuel-in" port on the pump (labeled on the diagram below), and then the "fuel out" port to the pre-installed fitting on the aluminum spacer plate and you're ready to go! It's that simple!


FUEL FILTERS - $19.99

We stock original equipment Sno-sport in-tank fuel filters for Sno-sports. The Yamaha part number for this item is 85G-24560-00-00 and it is a stock replacement part for both years of the Sno-sport.


FUEL FILLER CAPS - $28.99

We stock replacement fuel tank caps for all years of the Sno-sport. The stock Yamaha Sno-sport fuel tank cap, part number 85G-24610-00-00, has been discontinued, but we have been able to find a Kawasaki part that fits properly. This cap comes with a new mounting gasket and is a slightly different shape than the original Scoot part.


OIL TANK CAPS - $14.99

We stock OEM Sno-sport oil tank caps. The Yamaha part number for this cap is 1Y1-21770-01-00 and it is a stock replacement part for all Sno-sports.


POWERMADD HANDLEBAR RISER BLOCK - $34.99

We offer PowerMadd handlebar riser block kits for Yamaha Sno-sports. This aluminum block raises the handlebar 2" to get the bars closer to the rider when standing on the machine. Mounting bolts are included and this kit fits both years of the Sno-sport. This kit typically ships in 2-3 business days.


ROX SPEED FX ADJUSTABLE HANDLEBAR RISERS - $89.99

We offer Rox Speed FX Sno-sport adjustable handlebar risers. These beautifully machined billet aluminum risers bring the bars up by 2" and are angle adjustable. This kit fits both years of the Sno-sport. This kit typically ships in 2-3 business days.


SCOTTS HANDLEBAR GRIPS - $12.99

We stock Scott brand handlebar grips. These grips are sold in pairs and are available in black and red.


HEATED HANDLEBAR GRIPS - $69.99

We stock Heat Demon heated handlebar grip kits for Sno-sports. They work great with all 7/8" handlebars and come with a 3-position switch, wiring, and installation instructions.

When installing this kit, connect the positive lead of the heated grips to the blue wire going into the headlight dimmer switch. This information is omitted from the included installation instructions.


KICK STARTER LEVERS - $61.99

We offer replacement Sno-sport kick starter levers. The original lever assembly has been discontinued by Yamaha, but we were able to hunt down a Honda part that fits just right. The lever has a different shape, but works perfectly. The lever includes the required pinch bolt and it bolts up to both years of the Sno-sport. This part typically ships in about 4 business days.


KICK STARTER GEAR RETURN SPRING - $14.99

We stock Sno-sport kick starter lever return springs. The part number for this item is 90508-32768-00 and it is a stock replacement part for all years of the Sno-sport.


OWNER'S MANUALS - $24.99

We offer genuine Yamaha Sno-sport owner's manuals. Just like what you would get with a Sno-sport when purchased new from the dealer showroom, this Yamaha manual provides operation and basic service information. Please be sure to select the correct year of your machine below. This maunal typically ships in about 5 business days.


SERVICE MANUALS - $74.99

We offer genuine Yamaha Sno-sport service manuals. Just like the professionals use, this genuine Yamaha shop manual will tell you everything you need to know to work on, repair, or rebuild your Sno-sport. This book covers all years and versions of the Sno-sport. This manual typically ships in about 10 business days.


PISTON REPLACEMENT KITS - $257.99

Snoscoot.com stocks piston replacement kits for all Yamaha Sno-sports. This kit comes with a brand new Wiseco piston, rings, wrist pin, and circlips, as well as a genuine Yamaha wrist pin bearing. We had this kit manufactured just for Snoscoot.com and is only available as a second-oversize (+0.5mm).


PISTON RING SETS - $37.99

We offer genuine Yamaha piston ring sets for Sno-sports. These rings come as a pair and fit stock, first-over (+0.25 mm), and second-over (+0.50 mm) size factory Yamaha Sno-sport pistons for all years. These rings typically ship in about 5 business days.


BOYESEN POWER REEDS - $37.99

We stock Boyesen Power Reeds for stock Sport reed cages. These parts bolt right up and fit both years of the Sno-sport.


SEAT COVERS - $69.99

We stock black reproduction seat covers for all years of the Sno-sport. These covers fit just like the stock ones and are made just for us by a well known seat cover manufacturer. These covers have the Yamaha insignia just like the stock covers.


OEM STEEL SKIS - $84.99

The stock Yamaha Sno-sport skis have been discontinued by Yamaha, but we have been able to verify that the stock Sno-scoot skis fit on the Sno-sport if you drill the ski mounting holes out to 10mm. Also, if you drill out the second dimple on bottom of the ski (Sno-scoot and Sno-sport skis use the same stamping), the Sno-sport ski wear bars bolt right up. If you're purchasing two brand new skis here, purchase Sno-scoot ski wear bars on the Sno-scoot Common Parts page.


C&A PLASTIC SKIS & CARBIDES- $494.99

Snoscoot.com sells C&A plastic ski kits for all Yamaha Sno-sports. These kits come with a pair of modified black C&A plastic mini skis, pair of 6" 90° angled carbide ski wear bars, pair of beautiful fabricated ski adapter brackets, and the required hardware. Please be aware that the the included aluminum ski brackets will require 2 holes per bracket to be bored out to 10 mm to fit the stock ski pivot bolts of your Sno-sport (this kit is the same as on a Sno-scoot, which uses 8 mm ski pivot bolts). This kit makes use of your original ski pivot bolts, but requires replacement of your original pivot bolt nuts, which are included with this kit. Some bolt-together assembly is also required with this kit, but no modification to your Sno-sport is required.

For a limited time, we are offering these kits with red skis! We currently have two kits avaialble.


SNOSCOOT.COM C&A MINI SKI MOUNTING KITS - $210.99

We stock mounting bracket kits for mounting C&A mini skis on both years of the Sno-sport. If you already have a pair of skis, our kit is exactly what you need to bolt them onto your Sno-sport. Our kit comes with the same high quality light weight (only 11.4 oz each), yet sturdy ski mounting brackets and mounting hardware that we use on our complete C&A mini ski kit above. The brackets themselves make use of two of the ski wear mounting studs and nuts, and you will use your existing ski pivot bolts (replacement nuts are included). Please be aware that the the included aluminum ski brackets will require 2 holes per bracket to be bored out to 10 mm to fit the stock ski pivot bolts of your Sno-sport (this is the same kit that fits the Sno-scoot). Please also be aware that you will have to trim about 3/8" off the tops of your existing C&A ski mounting flanges, as we do with our complete kit above. This kit DOES NOT include skis or wear bars.


SKI SKINS - $119.99/SET

SNO-SPORT SKI SKINS ARE BACK! Made just for snoscoot.com by a US based plastics manufacturer, they are specifically molded for Sno-sport (and Sno-scoot) skis. These skins are made out of super durable 1/8" HDPE plastic and they fit just right! To keep the price down, you do have to drill the holes to mount them, but that's easy to do. The holes you need to drill are as follows.

HOLES TO DRILL:
1/4" for front mounting bolts (including stock rivet holes in ski)
1/2" for wear bar studs
1/2" hole for front of wear bar

For further mounting instructions, please give us a call. Our ski skins are sold in pairs and include the mounting hardware for the front, as well as washers for the ski wear bars. The ski and wear bar shown installed in the bottom three pictures to the left are NOT included.


STEEL SKI WEAR BARS - $21.99/PAIR

The OEM style Sno-sport ski wear bars that we typically sell are currently our of stock and all of our sources for them are as well at this time. If you are in need of a set of ski wear bars for your Sno-sport, we recommend purchasing the Sno-scoot ski wear bars that we sell on the Sno-scoot Common Parts page. The Sno-scoot bars are about 2" longer and require the second dimple at the end of your Sno-sport ski be drilled through (Sno-scoot and Sno-sport models used the same ski base stamping).


CARBIDE SKI WEAR BARS - $89.99/PAIR

We stock high-end Yamaha Sno-sport carbide ski wear bars. Specially made for Snoscoot.com by a well known snowmobile skag manufacture here in the US, these 1/2" diameter heavy-duty steel bars come with 4" of 60 carbide in the center, 5" of hardweld bead in the front, and 6.5" of hardweld bead in the back for solid bite and a long lasting bar. When installing these bars, please be aware that the second wear bar mounting dimple on the rear of each ski needs to be drilled out and the stock mounting holes, including the front hole, need to be oversized to fit the bar. These bars fit all stock Sno-sport skis and are sold in pairs, so if you need enough for one machine, order a quantity of one.


THROTTLE LEVERS - $28.99

We stock OEM Sno-sport throttle levers. The Yamaha part number for this item is 8V0-42138-00-00 and it is a stock replacement part for both years of the Sno-sport.


TIEROD ENDS - $29.99

We stock OEM tierod ends for Yamaha Sno-sports. The part number for each inner tierod end (steering stem end) is 86X-23841-00-00 and the part number for each outer tierod end (ski spindle end) is 86X-23845-00-00. For reference, the inner rod end has a right hand thread (part that threads into connecting tie rod tube) and the outer rod end has a left hand thread. These ball joints are stock replacement parts for all years of the Sno-sport.


TRACKS - $649/$699

Sno-sport tracks are back IN STOCK! The original Yamaha track was discontinued years ago, but we've stepped up to the plate and have been working with a track manufacturer to make these tracks for us. After 11 months of development time and multiple test tracks, we have come up with a durable design that fits perfectly and has passed our torture tests. The standard length tracks are the stock length for all Sno-sports and require no modification for installation. Please be aware that the center drive cog teeth are not utilized with this design (no modification required). WE ARE NOW ALSO SELLING LONG TRACKS FOR THE SNO-SPORT and proper length tracks for Sno-scoots (listed on Sno-scoot Common Parts page). The "long" tracks will have another 4 sets of windows over the stock Sno-sport design, making for a 106" track (technically 105.6"), so they will put another 12" of track on the ground, while the stock length tracks (89.6" in total length) bolt right up without any modification. We are even selling these tracks for a fair amount less than what we last offered the Yamaha track for!

+8" "long tracks" DO NOT include parts or instructions to lengthen your rear suspension skid, but is just the track, which is the most difficult part to source (works with stock track drive cogs).

OUR TRACKS HAVE ARRIVED AND ARE NOW READY TO SHIP!


TRACK CLIPS - $24.90/10 PACK

We stock quality aftermarket track clips for all Sno-sports. These clips are slightly different than the clips found on the original Sno-sport tracks, but very similar to the clips found on current Sno-scoot tracks (identical track designs other than length). We sell these clips in packs of 10, so if you need 1 to 10 clips, order a quantity of one of our kits.


TRACK STUD KITS - $80.99/$161.99

We stock offer carbide track stud kits for all Yamaha Sno-sports. These kits come with appropriately sized 3/4" long 60° carbide tipped studs, mounting nuts, and aluminum backing plates in kits of 24 or 48 so you can get some serious traction. The included studs are just long enough to add traction but not tear up the track guard, unless that part is broken and dangling, in which case these studs will shread it to bits! To the left, we have provided a couple diagrams showing how we recommend installing the two kits. If you're looking for serious bite, add a pair of the Snoscoot.com carbide ski wear bars or our C&A plastic ski kit (listed above) to your order and your Sport will feel like it's on rails!


TRACK SLIDERS - $31.99/PAIR

We stock OEM Sno-sport track sliders, also known as hyfax. We sell these as a set of two, so if you need a pair for a single machine, order a quantity of one. The Yamaha part number for each track slider is 8N4-47421-00-XX and this is a stock replacement hyfax set for both years of the Sno-sport.


WINDSHIELDS - $159.99

We offer quality aftermarket PowerMadd windshields for Yamaha Sno-sports. These shields provide great coverage keeping you a bit warmer when riding. The shield itself is clear with accent tinting at the bottom and comes with the required mounting hardware. This kit bolts up to all years of the Sno-sport.


WINTER SERVICE KITS - $143.97

We stock winter tune-up kits for all Yamaha Sno-sports. The kit consists of a new Yamaha drive belt, fuel filter, and spark plug.